As we all know that the waste from the industries is very harmful for the environment as well as
to our health, if not disposed in proper manner. The residue of manufactured sand (M-sand) after
washing are present in enormous quantity. The M-sand residue however used to fill the basement, major
quantity of the material is still disposed into the water bodies as waste. The aim of this research is to
avoid the wastage of M-sand and to partially replace the content of fly ash with the various % of residue
obtained from the m-sand in the fly ash brick and also to determine the optimum % of residue for better
results. After the full manufacturing process the bricks are tested in the laboratory and results are
analyzed regarding the water absorption and compressive strength. The objective of this research is to
make economical and to reduce the fly ash content in bricks to maintain environmental balance and avoid
problem of waste disposal. It was also expected that bricks must be lighter in weight, energy efficient and
meet compressive strength requirements of IS 1077:199.
%0 Journal Article
%1 noauthororeditor
%A Raja, Prof.V.Soundara
%A Kumar, Prof.R.Jagadeesh
%A Preethi, Prof.L.Agnes
%D 2017
%J International Journal of Research Publication
%K Bricks ash fly manufactured residue sand
%N 10011920178
%P 5
%R 10011920178.pdf
%T PARTIAL REPLACEMENT OF FLY ASH WITH M-SAND RESIDUE IN FLY ASH BRICK
%U http://www.ijrp.org/paper_detail/9
%V 1
%X As we all know that the waste from the industries is very harmful for the environment as well as
to our health, if not disposed in proper manner. The residue of manufactured sand (M-sand) after
washing are present in enormous quantity. The M-sand residue however used to fill the basement, major
quantity of the material is still disposed into the water bodies as waste. The aim of this research is to
avoid the wastage of M-sand and to partially replace the content of fly ash with the various % of residue
obtained from the m-sand in the fly ash brick and also to determine the optimum % of residue for better
results. After the full manufacturing process the bricks are tested in the laboratory and results are
analyzed regarding the water absorption and compressive strength. The objective of this research is to
make economical and to reduce the fly ash content in bricks to maintain environmental balance and avoid
problem of waste disposal. It was also expected that bricks must be lighter in weight, energy efficient and
meet compressive strength requirements of IS 1077:199.
@article{noauthororeditor,
abstract = {As we all know that the waste from the industries is very harmful for the environment as well as
to our health, if not disposed in proper manner. The residue of manufactured sand (M-sand) after
washing are present in enormous quantity. The M-sand residue however used to fill the basement, major
quantity of the material is still disposed into the water bodies as waste. The aim of this research is to
avoid the wastage of M-sand and to partially replace the content of fly ash with the various % of residue
obtained from the m-sand in the fly ash brick and also to determine the optimum % of residue for better
results. After the full manufacturing process the bricks are tested in the laboratory and results are
analyzed regarding the water absorption and compressive strength. The objective of this research is to
make economical and to reduce the fly ash content in bricks to maintain environmental balance and avoid
problem of waste disposal. It was also expected that bricks must be lighter in weight, energy efficient and
meet compressive strength requirements of IS 1077:199.},
added-at = {2018-05-13T22:44:53.000+0200},
author = {Raja, Prof.V.Soundara and Kumar, Prof.R.Jagadeesh and Preethi, Prof.L.Agnes},
biburl = {https://www.bibsonomy.org/bibtex/2ba0df5536904d1d3457a08912d7438fb/ijrp},
doi = {10011920178.pdf},
interhash = {8c12ed1fd312830de5792371d4608dff},
intrahash = {ba0df5536904d1d3457a08912d7438fb},
journal = {International Journal of Research Publication},
keywords = {Bricks ash fly manufactured residue sand},
language = {English},
month = {September 2017},
number = 10011920178,
pages = 5,
timestamp = {2018-05-13T22:44:53.000+0200},
title = {PARTIAL REPLACEMENT OF FLY ASH WITH M-SAND RESIDUE IN FLY ASH BRICK},
url = {http://www.ijrp.org/paper_detail/9},
volume = 1,
year = 2017
}