%0 Conference Paper %1 Awad2007 %A Awad, Mostafa M. %A El-Wahab, I. F. Abd %A Gad, H. E. %D 2007 %K scale 2007 heat-transfer fouling %T Effect of surface temperature on the fouling of heat transfer surfaces %U http://www.iwtc.info/2007_pdf/4-1.pdf %X The aim of the present work is to study the effect of surface temperature on the foulingrate. To carry out this study, an experimental setup has been designated andconstructed. A Perspex test tube of 300 cm length and 5.53 cm inner diameter withthree electric heaters fixed at the center is used as a test tube. Water with a solidparticle concentration of 1gm/lit is used as a test fluid. The experimental runs havebeen carried out under different surface temperatures (from 55oC to 95oC) with aconstant flow velocity of 0.08 m/s for about 280 hrs to reach the asymptotic fouling.The obtained results are represented in a graphical form and, show that the surfacetemperature has a great effect on the fouling resistance specially in the temperaturerange from 55oC to 71oC. This effect seams to be smaller when the surfacetemperature increases.

@inproceedings{Awad2007, abstract = {The aim of the present work is to study the effect of surface temperature on the foulingrate. To carry out this study, an experimental setup has been designated andconstructed. A Perspex test tube of 300 cm length and 5.53 cm inner diameter withthree electric heaters fixed at the center is used as a test tube. Water with a solidparticle concentration of 1gm/lit is used as a test fluid. The experimental runs havebeen carried out under different surface temperatures (from 55oC to 95oC) with aconstant flow velocity of 0.08 m/s for about 280 hrs to reach the asymptotic fouling.The obtained results are represented in a graphical form and, show that the surfacetemperature has a great effect on the fouling resistance specially in the temperaturerange from 55oC to 71oC. This effect seams to be smaller when the surfacetemperature increases.}, added-at = {2011-01-19T18:05:21.000+0100}, author = {Awad, Mostafa M. and El-Wahab, I. F. Abd and Gad, H. E.}, biburl = {https://www.bibsonomy.org/bibtex/208558c7abdf68c09f024b110e4562d54/thorade}, interhash = {6d2eec528d42eda1e102807bedaf576a}, intrahash = {08558c7abdf68c09f024b110e4562d54}, keywords = {scale 2007 heat-transfer fouling}, organization = {INTERNATIONAL WATER TECHNOLOGY CONFERENCE }, timestamp = {2011-01-19T18:05:21.000+0100}, title = {Effect of surface temperature on the fouling of heat transfer surfaces}, url = {http://www.iwtc.info/2007_pdf/4-1.pdf}, year = 2007 }