A three-dimensional, thermo-mechanically coupled ice flow model with induced anisotropy has been applied to a \~200 × 200 km domain around the Dome Fuji drill site, Antarctica. The model ("Elmer/Ice") is based on the open-source multi-physics package Elmer (<ahref="http://www.csc.fi/elmer/"target="\_blank">http://www.csc.fi/elmer/</a>) and solves the full Stokes equations. Flow-induced anisotropy in ice is accounted for by an implementation of the <b>C</b>ontinuum-mechanical, <b>A</b>nisotropic <b>F</b>low model, based on an anisotropic <b>F</b>low <b>E</b>nhancement factor ("CAFFE model"). Steady-state simulations for present-day climate conditions are conducted. The main findings are: (i) the flow regime at Dome Fuji is a complex superposition of vertical compression, horizontal extension and bed-parallel shear; (ii) for an assumed geothermal heat flux of 60 mW m<sup>−2</sup> the basal temperature at Dome Fuji reaches the pressure melting point and the basal melting rate is \~0.35 mm a<sup>−1</sup>; (iii) in agreement with observational data, the fabric shows a strong single maximum at Dome Fuji, and the age of the ice is decreased compared to an isotropic scenario; (iv) as a consequence of spatially variable basal melting conditions, the basal age tends to be smaller where the ice is thicker and larger where the ice is thinner. The latter result is of great relevance for the consideration of a future drill site in the area.
%0 Journal Article
%1 citeulike:10429035
%A Seddik, H.
%A Greve, R.
%A Zwinger, T.
%A Placidi, L.
%D 2011
%I Copernicus Publications
%J The Cryosphere
%K elmer 76m10-finite-element-methods-in-fluid-mechanics 76d07-stokes-and-related-oseen-etc-flows 86a40-glaciology 86-04-geophysics-explicit-machine-computation-and-programs
%N 2
%P 495--508
%R 10.5194/tc-5-495-2011
%T A full Stokes ice flow model for the vicinity of Dome Fuji, Antarctica, with induced anisotropy and fabric evolution
%U http://dx.doi.org/10.5194/tc-5-495-2011
%V 5
%X A three-dimensional, thermo-mechanically coupled ice flow model with induced anisotropy has been applied to a \~200 × 200 km domain around the Dome Fuji drill site, Antarctica. The model ("Elmer/Ice") is based on the open-source multi-physics package Elmer (<ahref="http://www.csc.fi/elmer/"target="\_blank">http://www.csc.fi/elmer/</a>) and solves the full Stokes equations. Flow-induced anisotropy in ice is accounted for by an implementation of the <b>C</b>ontinuum-mechanical, <b>A</b>nisotropic <b>F</b>low model, based on an anisotropic <b>F</b>low <b>E</b>nhancement factor ("CAFFE model"). Steady-state simulations for present-day climate conditions are conducted. The main findings are: (i) the flow regime at Dome Fuji is a complex superposition of vertical compression, horizontal extension and bed-parallel shear; (ii) for an assumed geothermal heat flux of 60 mW m<sup>−2</sup> the basal temperature at Dome Fuji reaches the pressure melting point and the basal melting rate is \~0.35 mm a<sup>−1</sup>; (iii) in agreement with observational data, the fabric shows a strong single maximum at Dome Fuji, and the age of the ice is decreased compared to an isotropic scenario; (iv) as a consequence of spatially variable basal melting conditions, the basal age tends to be smaller where the ice is thicker and larger where the ice is thinner. The latter result is of great relevance for the consideration of a future drill site in the area.
@article{citeulike:10429035,
abstract = {{A three-dimensional, thermo-mechanically coupled ice flow model with induced anisotropy has been applied to a \~{}200 × 200 km domain around the Dome Fuji drill site, Antarctica. The model ("Elmer/Ice") is based on the open-source multi-physics package Elmer (<ahref="http://www.csc.fi/elmer/"target="\_blank">http://www.csc.fi/elmer/</a>) and solves the full Stokes equations. Flow-induced anisotropy in ice is accounted for by an implementation of the <b>C</b>ontinuum-mechanical, <b>A</b>nisotropic <b>F</b>low model, based on an anisotropic <b>F</b>low <b>E</b>nhancement factor ("CAFFE model"). Steady-state simulations for present-day climate conditions are conducted. The main findings are: (i) the flow regime at Dome Fuji is a complex superposition of vertical compression, horizontal extension and bed-parallel shear; (ii) for an assumed geothermal heat flux of 60 mW m<sup>−2</sup> the basal temperature at Dome Fuji reaches the pressure melting point and the basal melting rate is \~{}0.35 mm a<sup>−1</sup>; (iii) in agreement with observational data, the fabric shows a strong single maximum at Dome Fuji, and the age of the ice is decreased compared to an isotropic scenario; (iv) as a consequence of spatially variable basal melting conditions, the basal age tends to be smaller where the ice is thicker and larger where the ice is thinner. The latter result is of great relevance for the consideration of a future drill site in the area.}},
added-at = {2017-06-29T07:13:07.000+0200},
author = {Seddik, H. and Greve, R. and Zwinger, T. and Placidi, L.},
biburl = {https://www.bibsonomy.org/bibtex/2997e4fe4584a218ded0d74855b3221d1/gdmcbain},
citeulike-article-id = {10429035},
citeulike-linkout-0 = {http://dx.doi.org/10.5194/tc-5-495-2011},
citeulike-linkout-1 = {http://www.the-cryosphere.net/5/495/2011/},
day = 6,
doi = {10.5194/tc-5-495-2011},
interhash = {f9ac274c45ed2235378fa5210ace275d},
intrahash = {997e4fe4584a218ded0d74855b3221d1},
journal = {The Cryosphere},
keywords = {elmer 76m10-finite-element-methods-in-fluid-mechanics 76d07-stokes-and-related-oseen-etc-flows 86a40-glaciology 86-04-geophysics-explicit-machine-computation-and-programs},
month = jun,
number = 2,
pages = {495--508},
posted-at = {2012-03-08 23:19:20},
priority = {2},
publisher = {Copernicus Publications},
timestamp = {2021-10-20T12:58:35.000+0200},
title = {{A} full {S}tokes ice flow model for the vicinity of {D}ome {F}uji, {A}ntarctica, with induced anisotropy and fabric evolution},
url = {http://dx.doi.org/10.5194/tc-5-495-2011},
volume = 5,
year = 2011
}