Article,
Secondary Filtration of Closed Loop in DC Locomotive
International Journal of Trend in Scientific Research and Development, 3 (3): 1106-1119 (April 2019)
DOI: https://doi.org/10.31142/ijtsrd23220
Abstract
The use of hydraulics has increased tremendously in the recent past due to the various advantages it provides such as high power to weight ratio, elimination of complex components, ease of transportation and safety to name a few. Moreover the main advantage that hydraulic locomotives provide over conventional locomotives is constant velocity. Though there are various advantages to using hydraulics, contamination of working fluid poses a severe threat to components such as premature wear of components, a corrosion of components which would require replacing them well before their life incurring significant loss. Contamination of hydraulic fluids cannot be prevented or eliminated but can be contained to a certain extent. The safe levels of contamination are arrived at by comparing to recommended oil cleanliness values defined by NAS. Even though hydraulic systems are provided with an in built filter known as primary filter to remove solid or particulate impurities at cleanliness value at recommended levels. The controlling of contamination levels in the hydraulic oil by use another filtration unit externally, will reduce the level of contamination significantly and increases the life of the hydraulic drive system. To monitor the level of contamination of various sizes closely, a particle counter added to the additional unit proves to be beneficial. This project investigates the change in level of contamination in the working fluid after addition of the secondary filtration unit. Dr. K Muthukumar | V. Nagendra Kumar "Secondary Filtration of Closed Loop in DC Locomotive" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23220.pdf
